Extron electronics XTP T USW 103 4K, User Manual

Page: 47 / 52

XTP T USW 103 4K Switcher • XTP System Configuration Software 39
Factory reset button
6
Factory Reset — Click the
Factory Reset
button to reset the switcher to factory
settings except for firmware.
NOTE: This is the same as the
E
ZXXX
SIS command (see Reset mode on
page 26).
Device Information panel
The
Device Information
panel displays device information and settings.
1
Model — Displays the device model.
2
Firmware Version — Displays the full
firmware version.
3
Selected Input — Displays the input number
of the currently selected input.
4
Auto-input Switching — Displays the On or
Off status of auto switch mode.
5
Signal Present — Displays the signal
presence of all three inputs.
6
HDCP — Displays the HDCP status of
inputs 2 and 3.
7
Selected Audio Input — Displays the type of
the currently selected audio input.
8
Audio only — Displays the status of the
Allow Audio Only
checkbox.
9
Analog Audio Gain — Displays the analog
audio gain in dB.