XTP T USW 103 4K Switcher • SIS Configuration and Control
26
Command
ASCII Command
(Host to Device)
ASCII Response
(Device to Host)
Additional Description
Front panel lockout mode (executive mode)
Set front panel lockout mode
X2!
X
Exe
X2!]
Allow or prevent input switching
or setting switch modes from
the front panel buttons.
View front panel lockout
mode status
X
Exe
X2!]
Device name
Set device name
EX2@
CN
}
Ipn
•X2@]
Reset device name
E•
CN
}
Ipn
•
USW 103
}
Reset the device name to the
factory default name.
View device name
E
CN
}
Ipn
•X2@]
Reset mode
System reset
E
ZXXX
}
Zpx
]
Resets unit to factory default.
Status
View input signal presence
0LS
Frq
X2#
1
X2#
2
X2#
3
]
View the input signal presence
of each input. The superscript
number next to the
X2#
variables refer to the input
number.
View HDCP input
E
IHDCP
}
HdcpI0
X2$
2
X2$
3
]
View the HDCP input status of
inputs 2 and 3. The superscript
number next to the
X2$
variables refer to the input
number.
View firmware version
Q
x.xx
]
View the firmware version.
View full firmware version
*Q
x.xx.xxxx
]
View the full firmware version.
View part number
N
60-1550-12
]
View the device part number.
NOTES:
X2!
= Front panel lock mode
0
= allow front panel operation
1
= prevent front panel operation
X2@
= Device name
Text label, maximum seven alphanumeric characters
X2#
= Input signal presence
0
= no input detected
1
= input detected
X2$
= HDCP status
0
= no source detected
1
= source is HDCP-compliant
2
= source is not HDCP-compliant
Summary of Contents for XTP T USW 103 4K
Page 6: ......
