MVP 104GX Installation
Installation, cont’d
2-6
Balanced audio
1
.
Attach the audio cable to a balanced speaker input connector (tip, ring,
and sleeve), as shown here.
2
.
Attach the other end of the audio cable to the audio cable connector
(Extron part number 10-319-10). Fasten the captive screws inside the
audio cable connector as shown in
figure 2-4
.
Connect the sleeve(s) to ground (GND). Connecting the sleeve(s) to a
negative (-) terminal will damage audio output circuits.
3
.
Slide the audio cable connector into the audio connector of the MVP
104GX, and plug the speaker end of the audio cable into the speakers.
Figure 2-4 — Fastening captive screws
Balanced Audio
Tip
Ring
Sleeve (s)
Tip
Ring
Tip (+)
Sleeve
Tip (+)
Ring (-)
Sleeve (ground)
Summary of Contents for Multi Video Processor MVP 104GX
Page 1: ...MVP 104GX Multi Video Processor 68 484 01 Printed in the USA...
Page 7: ...1 Chapter One Introduction About the MVP 104GX MVP 104GX Features MVP 104GX...
Page 34: ...MVP 104GX Operation Operation cont d 3 16...
Page 38: ...MVP 104GX Windows based Control Program Windows based Control Program cont d 4 4...
