manualshive.com logo in svg

Extron electronics Multi Video Processor MVP 104GX, User Manual

Share
Download
Extron electronics Multi Video Processor MVP 104GX User Manual Download Page 50

MVP 104GX Reference Information

A-4

Specifications — MVP 104GX

Video

Gain ................................................ Unity
Differential phase error .............. 1.5º,  0 to 10 MHz
Differential gain error ................. 1.5%,  0 to 10 MHz

Video input and loopthrough

Number/signal type ................... 4 S-video, 8 NTSC/PAL composite video
Connectors ................................... 4  4-pin mini-DIN female ....... S-video

8 BNC female .......................... composite video

Minimum/maximum level(s) .... 2.0V p-p
Impedance .................................... 75 ohms
Vertical frequency ....................... 50 Hz to 60 Hz

Video processing

Encoder ......................................... 10 bit digital

Video output

Number/signal type ................... 1 S-video, 2 composite video
Connectors ................................... 1  4-pin mini-DIN female ....... S-video

2  BNC female ......................... composite video

Nominal level ............................... S-video ....................... 0.7V p-p Y, 0.288V p-p C (burst)

Composite  video ..... 0.5V to 1V p-p

Impedance .................................... 75 ohms

Sync

Standards ...................................... NTSC 3.58, PAL

Audio 

Gain ................................................ Unbalanced 0dB,  ba6dB
Frequency  response .................... 20 Hz to 20 kHz, ±0.05dB
THD + Noise ................................. 0.03% @ 1 kHz, 0.3% @ 20 kHz at rated maximum output drive

(+19.5dBu input, +21dBu output, balanced/unbalanced)

S/N ................................................ >90dB, 21dBu, balanced, at rated maximum output drive
Crosstalk ....................................... <-80dB @ 1 kHz
Stereo channel separation .......... >80dB @ 1 kHz
CMRR ............................................ >75dB @ 20 Hz to 20 kHz

Audio input

Number/signal type ................... 4 stereo, balanced/unbalanced
Connectors ................................... 4  3.5 mm captive screw connectors, 5-pole
Impedance .................................... >50 kohms unbalanced, 25 kohms balanced, DC coupled
Minimum level ............................. -10dBu for full power out
Maximum input level .................. +19.5dBu (balanced/unbalanced) @ stated %THD+N
Input gain adjustment ................. -15dB to +9dB, adjustable per input via RS-232 or front panel

Audio output

Number/signal type ................... 1 stereo, balanced/unbalanced

Summary of Contents for Multi Video Processor MVP 104GX























































Reviews:

No comments

Brands by name

Popular brands

Load more brands