Extron electronics MPX Plus 866 A, User Manual

Page: 158 / 222

Switcher Software, cont’d
MPX Plus 866 A Media Presentation Matrix Switcher • Switcher Software
5-52
PRELIMINAR
Y
Upload HTML files
N
The HTML Files List window is for inserting your own HTML pages. This is
not the window to replace the firmware that controls all switcher operation. See
“Update firmware” in this chapter to replace the firmware.
You can create customized HTML pages for the switcher to display. The HTML
Files List window (figure 5-32) provides a way to view the contents of the
switcher’s file system and upload custom HTML pages to the switcher.
Figure 5-32 — HTML Files List window
N
The files listed in figure 5-32 are shown for example only and may not be present
on your switcher.
Upload HTML pages as follows:
N
The following characters are invalid in file names:
{space} + ~ , @ = ‘ [ ] { } < > ’ “ ; : | \ and ?.
1 . Connect the PC to the matrix switcher via one of the switcher’s RS-232 ports
or Ethernet port.
2 . Start the Matrix Switchers Control Program and connect to the MPX switcher.
See “Starting the program” in this chapter, steps 1 through 4 , starting on page 5-41.
3 . Click Tools > HTML File Manager .
4 . Click the Pick File(s) to Load to Server button. An open file window
appears.
5 . Navigate to the folder where you saved the HTML file(s). Select the file(s).
N
To select multiple files, hold the Ctrl key while you select the desired files.
N
If you want one of the HTML files that you created to be the default start-up
page, name the file “index.html”. The MPX switcher automatically looks for
that file name when you first connect to it using an Internet browser.
6 . Click on the Open button. The file(s) upload to the MPX switcher may take a
few minutes.
7 . Click on the
Update
button to confirm the upload.
8 . Click on the Close button to exit the HTML Files List window.