manualshive.com logo in svg

Extron electronics MPX Plus 866 A, User Manual

The Extron electronics MPX Plus 866 A is a cutting-edge audiovisual processor that enhances sound and video quality. A comprehensive Setup Manual is available for free download on our website, providing users with step-by-step instructions on optimizing their experience. Get your manual today at manualshive.com and unlock the full potential of your device.

Share
Download
background image

MPX Plus 866 A Media Presentation Matrix Switcher • Switcher Software

5-2

Switcher Software

PRELIMINAR

Y

Control Software

The Windows

®

-based Extron Digital Signal Processor (DSP) Configurator 

program and Matrix Switchers Control Program communicate with the switcher 

via the Ethernet LAN port, either rear panel RS-232 port, and the front panel 

Configuration (RS-232) port to provide an easy way to set up ties and sets of ties.  

The DSP Configurator further provides a tool for configuring and controlling all 

of the advanced MPX Plus DSP audio mixing and other processing functions.  The 

programs are compatible with Windows 2000, Windows XP, and later.  Updates to 

these programs can be downloaded from the Extron Web site (

www.extron.com

).

Installing the software

The programs are contained on the Extron Software Products Disk.  Install the 

software as follows:

N

  For full functionality, install all of the following programs:

 

•  DSP Configurator

 

•  Matrix Switchers Control Program

 

•  Firmware Loader

1

. 

Insert the disk into the drive.  The installation program should start 

automatically.  If it does not self-start, run Launch.exe from the disk.

 

The Extron software disk window appears (figure 5-1).

Figure 5-1 — Software disk window

2

. 

Click the 

Software

 tab (figure 5-1).

3

. 

Scroll to the desired program and click 

Install

 (figure 5-2).

 

Figure 5-2 — Software installation

Summary of Contents for MPX Plus 866 A































































































































































































































Reviews:

No comments

Related manuals for MPX Plus 866 A

Cisco Catalyst 3110G Getting Started Manual preview
Catalyst 3110G
Brand: Cisco Pages: 30
3Com NBX 100 Release Note preview
NBX 100
Brand: 3Com Pages: 8
Ultra GammaView 2555 User Manual preview
GammaView 2555
Brand: Ultra Pages: 20
LEGRAND Raritan Dominion LX II Quick Setup Manual preview
Raritan Dominion LX II
Brand: LEGRAND Pages: 7
TRENDnet TE100-S5 Lühike Paigaldusjuhend preview
TE100-S5
Brand: TRENDnet Pages: 11
Eaton Edison Cooper Power Series Installation And Operation Instructions Manual preview
Edison Cooper Power Series
Brand: Eaton Pages: 12
Radio Systems HUB16-DC Technical Manual preview
HUB16-DC
Brand: Radio Systems Pages: 19
3onedata IES2008 Quick Installation Manual preview
IES2008
Brand: 3onedata Pages: 2
Cabletron Systems SmartStack STS16-20R Installation And User Manual preview
SmartStack STS16-20R
Brand: Cabletron Systems Pages: 258
Network Technologies SE-DVI-2 Installation And Operation Manual preview
SE-DVI-2
Brand: Network Technologies Pages: 7
IPGARD SDHN-4D-P Quick Start Manual preview
SDHN-4D-P
Brand: IPGARD Pages: 2
3onedata TNS5000D Series Quick Installation Manual preview
TNS5000D Series
Brand: 3onedata Pages: 3
LINK-MI LM-AD01 User Manual preview
LM-AD01
Brand: LINK-MI Pages: 9
ATEN VM7104 Quick Start Manual preview
VM7104
Brand: ATEN Pages: 2
Contemporary Controls CTRLink EISK8P-GT Installation Manual preview
CTRLink EISK8P-GT
Brand: Contemporary Controls Pages: 4
ATEN VS-201 User Manual preview
VS-201
Brand: ATEN Pages: 9
EKOBUY ekb10075 User Manual preview
ekb10075
Brand: EKOBUY Pages: 8
IOGear MiniView G-CS12 Owner'S Manual preview
MiniView G-CS12
Brand: IOGear Pages: 18

Brands by name

Popular brands

Load more brands