2-5
FPC 5000 Front Panel Controller • FPC Installation and Operation
Rack Mounting the FPC Assembly
The appropriate rack mounting hardware is included with the controller. Rack
mount the controller as follows:
1
.
Insert the controller assembly into the rack, align the holes in the mounting
panel with those of the rack.
2
.
Secure the controller assembly to the rack using the supplied machine screws.
Rear Panel Connections
All connectors are on the rear of the FPC 5000 (figure 2-5).
EXT
. FDD
MOUSE
K/B
NET
PRN
AC 100V-230V
INPUT
DIO
COM4
COM3
VGA
COM2
COM1
I
o
1
2
3
Figure 2-5 — FPC 5000 Front Panel Controller rear panel features
1
Net port
— Connect one end of a Category (CAT) 5e or higher cable,
terminated with RJ-45 connectors, to the FPC 5000 via this RJ-45 connector.
The FPC 5000 ships with a 10-foot crossover CAT 5e cable.
