Extron electronics FOX3 Matrix 160x, User Manual

Page: 51 / 61

FOX3 Matrix Series Switcher • Internal Web Page 43
Device Status Panel
The Device Status panel (see figure 28 ,
2
on page 42) displays the current date,
time, time zone, the amount of time the device has been running ( Uptime ), and the internal
temperature in degrees Celsius.
To set the date and time:
1. Click EDIT (see figure 30 [left],
1
) in the
Device Status
panel. The
Device Status
Settings
panel opens to allow edits (right).
Figure 30. Device Status Panel
2. Edit the Date/Time and Timezone as desired.
3. When finished editing, click SAVE to confirm your changes or CANCEL to close the
window without making changes. Clicking the X in the upper-right corner of the screen
also closes the window.
4. Alternatively, click SYNC TO PC (
2
) to set the date and time according to your PC.
Network Settings Panel
In the
Network Settings
panel (see figure 28 ,
3
), set the IP address, subnet mask, and
gateway address for your FOX3, and turn DHCP On and Off.
To set the IP addresses:
1.
Click EDIT (see figure 31 [left],
1
) in the
Network Settings
panel. The
Network
Settings
panel opens to allow edits (right).
Figure 31. Network Settings Panel
30
31