FOX 500 Tx/Rx • Remote Control
Remote Control, cont’d
4-24
FOX 500 Tx/Rx • Remote Control
4-25
Figure 4-9 — Open window
a
. Click Browse. The open file window appears.
b
. Navigate to the folder where you saved the firmware
upgrade file. Select the file. The Firmware Loader
returns to the top.
N
Valid firmware files must have the file extension “.BIN”.
Any other file extension is not a firmware upgrade for your
FOX 500.
c
. Click Upload. The File Loader reports, "
This process
could take several minutes. Please wait...
" and then
displays a scroll bar that shows the status of the
upload.
d
. When the Firmware Loader reports, "
Transfer complete
!",
click the Exit button.
6
.
Cycle the FOX 500 unit's power.
7
.
If necessary, repeat this entire procedure on the other unit
of the transmitter/receiver pair.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203