FOX 500 Tx/Rx • Operation
Operation, cont’d
3-4
FOX 500 Tx/Rx • Operation
3-5
Menu system overview
Figure 3-2 shows a flowchart of the main menus in the menu
system.
Menu
Power
on
Menu
Next
Menu
Menu
Menu
Menu
30 sec.
30 sec.
PICTURE
CONTROL
Menu
Menu
30 sec.
Menu
OUTPUT
CONFIG
30 sec.
MEMORY
PRESETS
30 sec.
30 sec.
AUDIO
CONFIG
ADVANCED
CONFIG
EXIT MENU
PRESS NEXT
FOX 500
nn
.
n
k
nn
Hz
Figure 3-2 — Menu system flowchart
Menu button
—
Press the Menu button to activate the menu
system and to scroll through the five main menus.
Next button
—
Press the Next button to move between the
submenus of a selected main menu, to activate one for
viewing or configuration, and to save a selection.
Adjust
[
and Adjust
{
knobs
—
When in a submenu, rotate
the Adjust
[
knob and Adjust
{
knob to scroll through
the submenu options and select a setting. Refer to the
flowcharts in this chapter and to specific sections for
explanations on knob adjustments.
N
If you press the Menu button while a main menu is active,
the next main menu becomes active.
If you press the Menu button while a submenu is active,
the LCD backs up to display that submenu’s main menu.
N
To return to the default screens, let the receiver remain idle
for 30 seconds until the selected screen times out, or press
the Menu button until the Exit Menu appears, then press
the Next button.
N
From any menu or submenu, after 30 seconds of inactivity,
the receiver saves all adjustment settings and times out to
the default (FOX 500) LCD display.
Picture Control menu
Figure 3-3 is a flowchart that shows an overview of the Picture
Control menu, its submenus, and the available settings.
N
The Horizontal Start and Total Pixels/Pixel Phase
submenus are only available when both fiber cables are
installed between the transmitter and receiver.
ADVANCED
CONFIG
Menu
Menu
30 sec.
000 to
255
0000 to
xxxx
000 to
255
Menu
Next
Menu
Menu
Menu
PICTURE
CONTROL
30 sec.
30 sec.
0000 to
xxxx
000 to
xxxx
* This submenu is only
available when both fiber
cables are installed
between the transmitter
and receiver.
Next
Menu
Menu
Next
Next
OUTPUT
CONFIG
AUDIO
CONFIG
MEMORY
PRESETS
EXIT MENU
PRESS NEXT
Menu
Menu
FOX 500
nn
.
n
k
nn
Hz
H POS V
128 128
HORZ START
0000
Tt Pix Phase
0000 000
*
*
Figure 3-3 — Picture Control menu flowchart
Position submenu
The position submenu allows you to shift the receiver's output
image horizontally and vertically on the display. Rotate the
Adjust
[
knob to shift the image horizontally. Rotate the
Adjust
{
knob to shift the image vertically.
Horizontal Start submenu
The Horizontal Start submenu defines the horizontal position
of the first active pixel in the active area or the receiver's output.
Rotate either Adjust knob while in this submenu to set the start
variable.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
