3-33
CrossPoint 300 Matrix Switchers • Operation
3
.
Press and release the output 1 button (figure 3-51).
1
2
1
2
3
4
5
6
INPUTS
7
10
11
12
Press and release
the Output 1 button.
The LED lights.
The input LEDs display the selected output's audio volume level.
In this example, the lit input buttons indicate 40 to 41.5 percent of the applied audio
input. The unlit input buttons indicate an audio volume attenuation of 39 dB to 40 dB.
–39 dB attenuation,
41.5% volume
= Lit LED,
= Slow blinking LED
S
S
= Unlit LED,
Figure 3-51 — Select output 1
Figure 3-52 shows the same volume (41.5%) as in figure 3-51, but displayed on
a 16-output-button switcher, such as a CrossPoint 300 816 HVA.
In this example, the input buttons display an audio gain level of –39 dB.
= Lit LED,
= Unlit LED,
= Slow blinking LED
S
S
Figure 3-52 — Volume display on a 16-output-button switcher
4
.
Press and release the Esc (
) button once (figure 3-53) to increase the volume
by 1.5%.
Press and release the Esc (
) button several more times (figure 3-53) to
increase the volume by 1.5% per button push. Note the input button
indication changes that occur each time the Esc (
) button is pressed and
released.
Figure 3-53 show the result of pressing the Esc (
) button a total of 13 times.
1
2
3
4
5
6
INPUTS
7
8
11
12
The input LEDs display the selected output's audio volume level.
In this example, the lit input buttons indicate 59.5 to 61 percent of the applied audio
input. The unlit input buttons indicate an audio volume attenuation of 26 dB to 27 dB.
26 dB attenuation,
61% volume
= Lit LED,
= Unlit LED,
ESC
Press the Esc button to decrease the audio attenuation (thereby increasing the
audio level) that is applied to the output volume level by 1 dB per button push.
F
F
= Fast blinking LED
Figure 3-53 — Adjust the output audio volume
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
