3-11
CrossPoint 300 Matrix Switchers • Operation
Example 2: Adding a tie to a set of video and audio ties
The following steps show an example in which a new video tie is added to the
current configuration. The steps show the front panel indications that result from
your actions.
This example assumes that you have performed example 1.
1
.
Press and release the Esc button (figure 3-10).
ENTER PRESET VIEW
ESC
CONTROL
Press the Esc button to clear all selections.
The LED blinks once.
= Blink once
1
1
Figure 3-10 — Clear all selections
2
.
To select video only for the tie, if necessary, press and release the RGBHV
button and/or Audio button (figure 3-11).
RGBHV AUDIO
I/O
Press the RGBHV button to toggle on and off.
The LED lights when selected.
Press the Audio button to toggle on and off.
The LED is unlit when deselected.
Figure 3-11 — Select RGBHV only
3
.
Press and release the input 5 button (figure 3-12).
2
3
4
5
6
INPUTS
7
1
2
3
4
5
OUTPUTS
6
7
8
The Output 3, Output 4, and Output 8 LEDs light to indicate
the RGBHV ties created in example 1.
Press and release the Input 5 button.
The LED lights.
Figure 3-12 — Select an input
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
