2-3
CrossPoint 300 Matrix Switchers • Installation
Figure 2-2 shows the CrossPoint 300 1616 HVA.
The CrossPoint 300 816 and 168 are housed in the same 6U enclosure, but
have fewer input or output connectors to accommodate their smaller matrix
sizes.
RESET
INPUTS
1
3
5
7
9
6
13
8
2
4
11
12
10
14
15
16
OUTPUTS
1
3
5
7
9
6
13
8
2
4
11
12
10
14
15
16
15
16
13
14
11
12
9
10
7
8
5
6
3
4
1
2
15
16
13
14
11
12
9
10
7
8
5
6
3
4
1
2
15
16
13
14
11
12
9
10
7
8
5
6
3
4
1
2
15
16
13
14
11
12
9
10
7
8
5
6
3
4
1
2
15
16
13
14
11
12
9
10
7
8
5
6
3
4
1
2
OUTPUTS
OUTPUTS
15
16
13
14
11
12
9
10
7
8
5
6
3
4
1
2
15
16
13
14
11
12
9
10
7
8
5
6
3
4
1
2
15
16
13
14
11
12
9
10
7
8
5
6
3
4
1
2
15
16
13
14
11
12
9
10
7
8
5
6
3
4
1
2
15
16
13
14
11
12
9
10
7
8
5
6
3
4
1
2
INPUTS
INPUTS
8
5
3
7
4
2
1
6
Figure 2-2 — CrossPoint 300 1616 HVA
RGBHV input and output
The switcher can connect to up to as many as 16 RGBHV video and/or stereo audio
devices, depending on the model. The switcher can output to as many as 16 video
and/or audio outputs, depending on the model.
The CrossPoint Series switchers can also switch RGBS, RGsB,
RsGsBs, component video, S-video, or composite video by using
four, three, two, or one BNC(s).
If switching a video format other than RGBHV, ensure that the
same video planes (R, G, B, H/HV, and/or V) are used on the
switcher output as on the input.
The switchers do not alter the video signal in any way. The
signal output by the switcher is in the same format as the input.
On the 8 x 16, 16 x 8, and 16 x 16 matrix sizes, the connectors
for each video plane are grouped together (all of the red inputs
grouped together, all of the green inputs grouped, and so on).
Ensure that you connect the input on each video plane to the
corresponding connector in the correct group (see the drawing at
right).
1
RGBHV video inputs
— Connect RGBHV video inputs to these
BNC connectors for each input.
2
RGBHV video outputs
— Connect RGBHV video displays or
other devices to these BNC connectors for each output.
1
2
1
2
1
2
1
2
1
2
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
