Extreme Networks Summit WM20, User Manual

Page: 93 / 270

WM-AD Global Settings
Summit WM20 User Guide, Software Release 4.2
93
To define RADIUS servers for WM-AD global settings:
1 From the main menu, click WM-AD Configuration . The WM Access Domains list is displayed.
2 In the left pane, click Global Settings . The Authentication tab is displayed.
3 To define a RADIUS server available on the network, do the following:
●
In the
Server Name
box, type a name.
●
In the
Server Address
box, type the IP address.
●
In the Shared Secret box, type the password that is required in both directions. This password is
used to validate the connection between controller and the RADIUS server.
4
In order to proofread your password before saving the configuration, click
Unmask
. The password is
displayed. To mask the password, click
Mask
.
This precautionary step is highly recommended in order to avoid an error, later, when the Summit
WM Controller attempts to communicate with the RADIUS server.
5 To add the server to the list, click Add .
6
To remove a server, select the server in the list and click
Remove selected server
.
7
To save your changes, click
Save
.
To define admission control thresholds for WM-AD global settings:
1 From the main menu, click WM-AD Configuration . The WM Access Domains list is displayed.
2 In the left pane, click Global Settings . The Authentication tab is displayed.
3 Click the Wireless QoS tab.