manualshive.com logo in svg

Extreme Networks Summit WM20, User Manual, Page: 205 / 270

Share
Download
Extreme Networks Summit WM20 User Manual Download Page 205

Performing Summit WM Controller Software Maintenance

Summit WM20 User Guide, Software Release 4.2

205

3

Click the 

OS Software 

tab.

The 

Available OS Images

 section displays the list of software versions that have been downloaded 

and are available.

4

In the 

Upgrade

 section, select an image from the 

Select an image to use

 drop-down list.

5

To launch the upgrade with the selected image, click 

Upgrade Now

.

6

In the dialog box that is displayed, confirm the upgrade.

At this point, all sessions are closed. The previous software is uninstalled automatically. The new 
software is installed. The Summit WM Controller reboots automatically.

To download a new operating system software image:

1

From the main menu, click 

Summit Switch

. The 

Summit SwitchConfiguration

 screen is displayed.

2

From the left pane, click 

Software Maintenance

. The 

SWM Software 

tab is displayed. 

3

Click the 

OS Software 

tab.

4

To download a new image to be added to the list, in the 

Download Image

 section type the 

following: 

●

FTP Server 

– The IP of the FTP server to retrieve the image file from.

●

User ID 

– The user ID that the controller should use when it attempts to log in to the FTP server.

●

Password 

– The corresponding password for the user ID.

●

Confirm 

– The corresponding password for the user ID to confirm it was typed correctly. 

●

Directory 

– The directory on the server in which the image file that is to be retrieved is stored.

●

Filename 

– The name of the image file to retrieve.

●

Platform

 – The AP hardware type to which the image applies. The are several types of AP and 

they require different images.

Summary of Contents for Summit WM20















































































































































































































































































Reviews:

No comments