manualshive.com logo in svg

Extreme Networks Summit WM20, User Manual

The Extreme Networks Summit WM20 is a cutting-edge networking product designed for seamless connectivity. To ensure hassle-free installation, detailed Installation Instructions can be easily accessed and downloaded for free from our website. Get your hands on the comprehensive manual at manualshive.com, and set up your networking system effortlessly.

Share
Download
background image

Bridging Traffic Locally

Summit WM20 User Guide, Software Release 4.2

149

●

Untagged

If you select 

Tagged

, type the VLAN ID in the

 VLAN ID

 box. 

NOTE

The VLAN IDs are assigned by the branch office network administrator. The AP will operate correctly only if you 
set the VLAN ID corresponding to the VLAN ID that was setup in the LAN. 
Configuring two untagged branch WM-ADs to the same AP on different radios is permitted. This is similar to 
having two untagged branch WM-ADs with the same VLAN ID assigned to the same AP on different radios. In 
both cases, the AP will connect the two WM-ADs. That type of configuration can be viewed as a single WM-AD/
VLAN with different SSIDs on different radios.

An effective scenario of the configuration described above, in which the same subnet is used with different 
SSIDs on radio a and b/g, is when this configuration is defined consistently on all APs. It would allow dual band 
a+b/g clients to associate to one of the radios by specifying the correct SSID. This is particularly effective with 
Microsoft clients, which do not allow defining a preferred radio.

6

To save your changes, click 

Save

.

NOTE

In previous releases, an entire AP had to be put into branch mode. In the current release, an individual WM-AD 
can be put into bridging mode. An AP can have bridged and non-bridged WM-ADs.

NOTE

When a WM-AD is setup for bridged mode, it cannot be switched to tunneled mode. The administrator must 
delete and re-add the WM-AD. 

Summary of Contents for Summit WM20















































































































































































































































































Reviews:

No comments

Related manuals for Summit WM20

ABB FDNA-01 Quick Installation And Start-Up Manual preview
FDNA-01
Brand: ABB Pages: 2
IBM ServeRAID M5014 User Manual preview
ServeRAID M5014
Brand: IBM Pages: 106
Ebyte E70 Series User Manual preview
E70 Series
Brand: Ebyte Pages: 34
XVision XD200 User Manual preview
XD200
Brand: XVision Pages: 28
YASKAWA CC-Link Installation Manual preview
CC-Link
Brand: YASKAWA Pages: 61
Panasonic FP0 Series Specifications preview
FP0 Series
Brand: Panasonic Pages: 27
Panasonic CZ-64ESMC2 Instruction Manual preview
CZ-64ESMC2
Brand: Panasonic Pages: 78
Panasonic GM1 Series Reference Manual preview
GM1 Series
Brand: Panasonic Pages: 98
NAiS FP0 Series Hardware Manual preview
FP0 Series
Brand: NAiS Pages: 173
Panasonic SL-VGU1-EC Instruction Manual preview
SL-VGU1-EC
Brand: Panasonic Pages: 2
Bang & Olufsen Beo4 Getting Started preview
Beo4
Brand: Bang & Olufsen Pages: 80
Bang & Olufsen Beo4 Manual preview
Beo4
Brand: Bang & Olufsen Pages: 13
T&D TR7 Series Safety Precautions And Instructions preview
TR7 Series
Brand: T&D Pages: 2
T&S B-0107 Installation And Maintenance Instructions preview
B-0107
Brand: T&S Pages: 5
UNICORECOMM UM4B0 User Manual preview
UM4B0
Brand: UNICORECOMM Pages: 32
UNICORECOMM UM220-IV M0 Additional Instructions For Installation And Operation preview
UM220-IV M0
Brand: UNICORECOMM Pages: 7
UNICORECOMM UM220-INS NF Installation And Operation User Manual preview
UM220-INS NF
Brand: UNICORECOMM Pages: 26
UNICORECOMM UM220-INS NF User Manual preview
UM220-INS NF
Brand: UNICORECOMM Pages: 25

Brands by name

Popular brands

Load more brands