Extreme Networks Summit WM20 User Manual Download Page 204

Page: 204 / 270

Performing System Maintenance

Summit WM20 User Guide, Software Release 4.2

204

●

FTP Server

– The IP of the FTP server to retrieve the image file from.

●

User ID

– The user ID that the controller should use when it attempts to log in to the FTP server.

●

Password

– The corresponding password for the user ID.

●

Confirm

– The corresponding password for the user ID to confirm it was typed correctly.

●

Directory

– The directory on the server in which the image file that is to be retrieved is stored.

●

Filename

– The name of the image file to retrieve.

●

Platform

– The AP hardware type to which the image applies. The are several types of AP and

they require different images.

Click

Download

. The image is downloaded and added to the list.

To delete a Summit WM Controller software image:

From the main menu, click

Summit Switch

. The

Summit Switch Configuration

screen is displayed.

From the left pane, click

Software Maintenance

. The

SWM Software

tab is displayed.

To delete a software image from the list, in the

Available SWM Images

list, click the image.

Click

Delete

. The image is removed from the list.

Updating Operating System Software

You can update the Operating System (OS) software using the Software Maintenance function.

To upgrade operating system software:

From the main menu, click

Summit Switch

. The

Summit Switch Configuration

screen is displayed.

From the left pane, click

Software Maintenance

. The

SWM Software

tab is displayed.

Summary of Contents for Summit WM20















































































































































































































































































Search results

Summary of Contents for Summit WM20

Reviews:

Extreme Networks Summit WM20, User Manual, Page: 204 / 270

Search results

Summary of Contents for Summit WM20

Reviews: