manualshive.com logo in svg

Extreme Networks ExtremeWireless AP560i, Installation Manual, Page: 13 / 46

Share
Download
Extreme Networks ExtremeWireless AP560i Installation Manual Download Page 13

You can install the access point to a wall or a pole using the KT-147407-02 bracket parts or the MBO-
ART02, 10 in. 2-axis articulating mounting bracket, or the WS-MBO-POLE01 (#30520) bracket. The
ordering details are described in the following tables.

Table 4: KT-147407-02 bracket order information

Part number

Box contents

KT-147407-02

The KT-147407-02 bracket comes with three bracket parts:
• Flat part with holes on the metal surface
• 1-axis tilt part
• Boxed pole part with step edges

Six hex-head M6 stainless-steel screws
Two hex-head M12 stainless-steel screws
Two hex-head M12 stainless-steel nuts
One URL card

The KT-147407-02 bracket kit can be used with KT-150173-01 extension arm for wall or pole installations.

Note
The KT-150173-01 extension arm must be purchased separately.

AP560i Overview

EIO-04 under-seat enclosure order information

ExtremeWireless™ AP560i Access Point

13

Summary of Contents for ExtremeWireless AP560i















































Reviews:

No comments