To attach your switch to a two-post rack, follow these steps:
1. On one side of the switch, attach one of the short mounting brackets to the switch housing.
a. For a front mount, position the bracket over the holes so that the flange (ear) is even with the
front of the switch, as shown in the figure below:
Attaching a Short Mounting Bracket (Ear): Front
of Switch
.
Figure 15: Attaching a Short Mounting Bracket (Ear): Front of Switch
Attaching the Switch to a Two-Post Rack
Installing Your Switch
44
ExtremeSwitching SLX 9250 Hardware Installation Guide
