3. To remove a switch from a four-post rack, do the following:
a. Release the tabs on both slider assemblies, and slide the switch away from the rear of the rack.
See the diagram below -
Removing the Switch from the Slider Assemblies
.
Figure 28: Removing the Switch from the Slider Assemblies
b. Disengage the retainers that are connecting the mounting brackets with the sliding rails on both
sides.
c. Carefully slide the switch out of the slider assembly and place it on a flat surface.
You can leave the slider assemblies in place. If you want to remove them, continue with the next
step .
Removing and Replacing Components
Removing the Switch from the Rack
ExtremeSwitching SLX 9250 Hardware Installation Guide
67
