c. Ensure that the slider assembly is level. If necessary, move it up or down at the rear of the rack.
d. Snap the rear clamp into place. See Figure
Attaching the Slider Assembly to the Rear Rack Post
.
Figure 10: Attaching the Slider Assembly to the Rear Rack Post
7. Repeat step 6 to attach the other slider assembly to the front and rear rack posts on the other side.
8. On both sides, locate the sliding rails (intermediate members) in the slider assemblies, and pull them
out to their full extent. See Figure
Extending the Slider Assembly to Fit the Rack
.
Figure 11: Extending the Slider Assembly to Fit the Rack
The sliding rails remain attached to the slider assembly.
9. Screw the mounting ear thumbscrews into the rack rails to hand tightness.
Installing Your Switch
Attaching the Switch to a Four-Post Rack
ExtremeSwitching SLX 9250 Hardware Installation Guide
41
