14
15. Using the same process as with the ailerons and elevator, slide the rudder
onto the hinges and secure to the vertical stabilizer with thin CA.
16. Locate the carbon fiber tailwheel assembly in the hardware package.
Secure the tailwheel bracket to the bottom rear of the fuselage with the
provided wood screws. Make sure the pivot point of the assembly is over the
hinge line of the rudder for best results
.
17. Secure the tiller using the provided screw, but do not over tighten as the
tiller should be able to move on the screw as the rudder is deflected
.
Summary of Contents for 60 EXTRA 300 EXP
Page 1: ...1 52 EXTRA 300 EXP Electric ARF Copyright 2016 Extreme Flight...
Page 10: ...10...
Page 16: ...16...