Extreme Flight 60 EXTRA 300 EXP, Instruction Manual

Page: 9 / 21

9
8. Locate the carbon fiber main landing gear, 2 axles, 2 locking nuts, 2
wheels, 2 wheel collars and the 2 wheel pants from the hardware package.
Place the threaded portion of the axle through the hole in the carbon gear and
screw the lock nut onto the axle, but do not tighten completely. Place the
wheel onto the axle and secure with a wheel collar. There is a slot pre-cut in
the wheel pant to allow it to fit over the axle. Before installing the wheel pant
place a drop of silicon based glue onto the wheel pant just above the pre-cut
slot. This will prevent the wheel pant from rotating, but allow it to move in
the case of a mishap which may help to prevent damage. Slide the wheel pant
into position over the axle and tighten the nut on the axle, taking care to make
sure the wheel pant is positioned properly. Repeat this process for the
remaining wheel pant. Again this is probably better explained in the
following series of pictures
.