Extreme Flight 60 EXTRA 300 EXP, Instruction Manual

Page: 12 / 21

12
11. Insert the stabilizer into its slot and the carbon fiber wing tube into the
plastic sleeve. Use a ruler to insure that the stabilizer is centered in its slot
and compare the stabilizer to the wing tube to make sure it is properly
aligned. Sand or shim the slot if necessary to ensure proper alignment.
Secure the stabilizer with CA.
12. Remove the covering over the left slot on the bottom of the elevator where
the elevator control horn will be installed. Scuff the portion of the control
horn that will insert into the elevator with sandpaper. Slide the horn into the
baseplate and secure the control horn with medium CA
.