Extreme Flight 60 EXTRA 300 EXP, Instruction Manual

Page: 8 / 21

8
6. Use the screws provided by the servo manufacturer to secure the aileron
servo in the designated location. Make sure the output shaft is positioned
toward the leading edge of the wing.
7. Locate the 2 threaded aileron pushrods that are the same size and 4 micro
ball links along with 4 2mm screws, nuts and washers. Thread the ball links
onto each end of the pushrods and secure to the servo arm and control horn
with the 2 mm hardware as shown in the picture. We recommend the use of
the Extreme Flight lightweight electric servo arms as shown. Please note the
orientation of the pushrod in relation to the control horn.
Repeat this process for the other wing half.