40
W415-1598 / 06.01.16
14.0 diagnostic displays
display
Reason
solution
off
Appliance off
-
staRt
The START-UP phase is in progress
-
pellet feeding
The pellet feeding during the IGNITION phase is in progress
ignition
The IGNITION phase is in progress
-
staRt-up
The START-UP phase is in progress
-
WoRK
The normal WORK phase is in
progress
-
Modulation
The appliance is modulating
-
BuRn pot cleaning
The automatic burn pot cleaning is
in progress.
The automatic burn pot cleaning (not in 1st power) is performed
at pre-established intervals of continued working.
final cleaning
When the appliance is switched off, FINAL CLEANING phase is in progress. The FINAL CLEANING phase
lasts about 10 minutes.
standBy
Appliance off due to temperature
reached and in STANDBY. Waiting
for REIGNITION.
To deactivate the STANDBY function, see "STANDBY" section.
standBy ext
Appliance off due to an external
thermostat, waiting for REIGNITION To deactivate the STANDBY function, see "STANDBY" section.
cooling stand-By
A new ignition is attempted
when the appliance has just been
switched off
When the appliance switches off, it is necessary to wait for the
exhaust motor to shut down completely before cleaning the
burn pot.
The appliance can only be reignited when these operations
have been performed.
cool. stdBy -
BlacK out
The appliance is cooling due to
black out
On completion of the COOLING phase, it will reignite
automatically.
loW-ta
Room thermostat set at minimum
value.
The appliance only works at 1st power independently from the
power set. To exit this function, raise the room temperature
using key 4 and then key 2.
Hot
Set room thermostat set at
maximum value.
The appliance works at set start, without ever modulating. To
escape this function, lower the set temperature using key 4 and
then key 1.
pellet HoppeR open
The hopper lid is open or not
properly closed.
The appliance switched OFF since
hopper lid was open or not properly
closed.
Close the hopper lid within 30 minutes.
Ensure that hopper lid is properly closed and restart the
appliance.
seRvice
When this message appears, contact the authorized technician for ordinary cleaning of the appliance.
If cleaning is not performed, the message will be displayed at every ignition but without interrupting
normal appliance operation.
Summary of Contents for Vicenza V3.4
