21
RECOMMENDATIONS FOR USE
Chapter 7
RECOMMENDATIONS FOR USE
Problem
Possible cause
Possible solution
The fl ames go out
Butterfl y valve in the closed fl ue
Flue gas exhaust pipe blocked by
soot
Flue draught too low
Insuffi
cient primary air inlet
Burner dirty and blocked
Gaskets used
Upper inspection lid positioned
incorrectly
The pellets do not slide into the
tank
Check that the fl ue is not obstructed by soot, that
the butterfl y for draught regulation is not completely
closed and that draught between 14 and 20 Pa is
guaranteed
Increase the inlet primary air using the regulation
knob
Use the grate shaker combs to clean the burner
Check the correct position of the upper inspection
lid
Check sealing of the upper lid gaskets, of the
intermediate base of the tank, the lateral inspection
lid and the upper inspection lid. If they are worn,
contact qualifi ed staff for their replacement
Check the opening of the lever that blocks sliding
of the pallet into the tank
Smoke escaping from
the opening of the
pellet tank lid
Gaskets used
Butterfl y valve in the closed fl ue
Flue gas exhaust pipe blocked by
soot
Flue draught too low
Burner dirty and blocked
Upper inspection lid positioned
incorrectly
Check sealing of the upper lid gaskets, of the
intermediate base of the tank, the lateral inspection
lid and the upper inspection lid. If they are worn,
contact qualifi ed staff for their replacement
Check that the fl ue is not obstructed by soot, that
the butterfl y for draught regulation is not completely
closed and that draught between 14 and 20 Pa is
guaranteed
Increase the inlet primary air using the regulation
knob
Use the grate shaker combs to clean the burner
Check the correct position of the upper inspection
lid
The walls inside
the stove become
excessively dirty during
functioning
Butterfl y valve in the closed fl ue
Flue gas exhaust pipe blocked by
soot
Flue draught too low
Insuffi
cient primary air inlet
Burner dirty and blocked
Gaskets used
Upper inspection lid positioned
incorrectly
Check that the fl ue is not obstructed by soot, that
the butterfl y for draught regulation is not completely
closed and that draught between 14 and 20 Pa is
guaranteed
Increase the inlet primary air using the regulation
knob
Use the grate shaker combs to clean the burner
Check the correct position of the upper inspection
lid
Check sealing of the upper lid gaskets, of the
intermediate base of the tank, the lateral inspection
lid and the upper inspection lid. If they are worn,
contact qualifi ed staff for their replacement
Summary of Contents for Cleopatra
Page 2: ...2...
Page 7: ...7 TECHNICAL FEATURES Chapter 2 figure 2 1...
Page 26: ...26 Notes...
Page 27: ...27 Notes...
