69
68
EN
EN
prescribed for the specific power tool with
respect to the given work conditions and the
type of work being performed.
Using power
tools for tasks other than for which they are designed
may lead to dangerous situations.
h)
Handles and grip surfaces must be kept dry,
clean and free of grease.
Slippery handles and
grip surfaces do not ensure a safe grip and control
over the power tool in unexpected situations.
5) OPERATING AND MAINTAINING
CORDLESS POWER TOOLS
a)
The power tool charge only using the char-
ger specified by the manufacturer.
A charger
that may be suitable for one type of battery pack,
may lead to a fire hazard if used with a different
battery pack.
b)
Only use the tool with a battery pack that
is explicitly determined for the given tool.
Using any other battery pack may create a accident
or fire hazard.
c)
When the battery pack is not being used,
protect it against contact with other metal
items such as paper clips, coins, keys, nails,
screws or other small metal items that could
make a connection between both battery
contacts.
Short circuiting the battery contacts may
cause burns or a fire.
d)
Incorrect use may cause liquids to leak out of
the battery; avoid coming into contact with
them. In the event of accidental contact with
these liquids, rinse the affected area with
water. In the event that the liquid enters the
eye, seek medical help.
Liquids leaking from the
battery may cause inflammations or burns.
e)
A battery pack or power tool that is
damaged or modified, must not be used.
Damaged or modified batteries may behave errati-
cally, which may result in a fire, an explosion or an
injury hazard.
f)
Battery packs or power tools must not be
exposed to a fire or excessive heat.
Exposure
to fire or a temperature exceeding 130°C may result
in an explosion.
g)
It is necessary to adhere to all battery
charging instructions and not to charge
the battery pack or power tool outside the
temperature range specified in this user‘s
manual.
Incorrect charging, or charging at temperatures
outside the specified range may damage the battery
and increase the risk of fire.
6) SERVICE
a)
Have your cordless power tool repaired by
a qualified person using identical spare parts.
This will ensure that the same level of safety will be
achieved as before the repair of the power tool.
b)
Damaged battery packs must never be
repaired.
The battery pack should only be repaired
by the manufacturer or at an authorised service
centre.
VIII. Safety instructions
for reciprocating saws
y
When performing activities, where a cutting tool
may come into contact with hidden conduits or
its own power cord, hold the power tool by the
insulated holding surfaces.
In the event that the
machining tool comes into contact with a „live“ conduit,
the uninsulated metal parts of the power tool will become
live and may result in the user suffering injury by electrical
shock.
y
Clamps or another practical method is used to
secure and support the workpiece on a stable
base.
Holding the workpiece in the hand or against
the body leads to its instability and may result in loss of
control.
The power tool creates an electromagne-
tic field during operation, which may
negatively affect the operation of active or
passive medical implants (pacemakers)
and threaten the life of the user. Prior to using this power
tool, ask a doctor or the manufacturer of the implant,
whether you may work with this power tool.
y
Do not use the cordless power tool for a purpose other
than that for which it was designed. Do not modify the
saw for different applications.
currently doing and must concentrate and
use common sense. The power tool must not
be used when the user is tired or under the
influence of drugs, alcohol or medication.
Momentary inattentiveness when using the power
tool may result in serious injury to persons.
b)
Use personal protective aids. Always wear
eye protection.
Use protective aids, such as
a respirator, safety footwear with anti-slip soles,
hard head cover or hearing protection appropriately
to the work conditions; they reduce the risk of injury
to persons.
c)
It is essential to avoid accidentally starting
the power tool. It is necessary to check that
the trigger is in the Off position before
plugging the power plug into a power socket
and/or when connecting the battery pack,
lifting or carrying the power tool.
Carrying the
power tool with a finger on the trigger or connecting
the power tool‘s plug with the switch engaged may
cause an accident.
d)
It is necessary to remove all adjustment
tools and spanners before turning on the
power tool.
An adjustment tool or spanner left
attached to a rotating part of the power tool may
result in injury to persons.
e)
The user may only work in locations that
they can reach safely. The user must always
maintain a stable stance and balance.
This
will provide better control over the power tool in
unforeseeable situations.
f)
Dress in an appropriate manner. Do not wear
loose clothing or jewellery. The user must
ensure that they have hair and clothing at
a sufficient distance from moving parts.
Loose clothing, jewellery and long hair may become
caught in the moving parts.
g)
If there is equipment available for the
extraction and collection of dust, it is nece-
ssary that such equipment is connected and
used correctly.
The use of such equipment may
limit the danger posed by the created dust.
h)
The user must not become complacent and
start ignoring the fundamentals of power
tool safety due to the routine arising from
frequent use of the power tool.
Careless
activity may cause serious injury within a fraction of
a second.
4) OPERATING AND MAINTAINING
POWER TOOLS
a)
Power tools must not be overloaded. It
is necessary to use power tools that are
designed for the work being performed.
Appropriate power tools for a given task will do the
job better and with greater safety.
b)
Power tools that cannot be turned on
and off with a trigger/switch must not be
used.
Any power tools that cannot be controlled
using a trigger/switch are dangerous and must be
repaired.
c) Before making any adjustments, replacing
accessories or before storing the power tool, it is
necessary to pull the power plug out of the power
socket and/or remove the battery pack out of the
power tool, if it is removable.
These preventative
safety measures limit the danger of accidentally
starting the power tool.
d)
When not used, the power tool must be
stored out of children‘s reach, and persons
not acquainted with the power tool or these
instructions must not be permitted to use
the power tool.
A power tool in the hands of inex-
perienced users is dangerous.
e)
Power tools and accessories need to be main-
tained. It is necessary to check the adjus-
tment of moving parts and their movement;
focus on cracks, broken parts or any other
circumstances that may threaten the proper
operation of the power tool. If the power
tool is damaged, it is necessary to have it
repaired before using it again.
Many accidents
are caused by insufficiently maintained power tools.
f)
It is necessary to keep cutting power tools
clean and sharp.
Correctly maintained and shar-
pened cutting power tools are less likely to get stuck
on material or to jam and they are also easier to
control.
g)
It is necessary to use power tools, accesso-
ries, working tools, etc. in accordance with
these instructions and in such a manner as
