Extech Instruments
2 TKG250- EN V2.4 11/13
WARRANTY
FLIR Systems, Inc. warrants this Extech Instruments brand device
to be free of
defects in parts and workmanship for
two years
from date of shipment (a six month limited
warranty applies to sensors and cables). If it should become necessary to return the
instrument for service during or beyond the warranty period, contact the Customer Service
Department for authorization. Visit the website www.extech.com for contact information. A
Return Authorization (RA) number must be issued before any product is returned. The
sender is responsible for shipping charges, freight, insurance and proper packaging to
prevent damage in transit. This warranty does not apply to defects resulting from action of
the user such as misuse, improper wiring, operation outside of specification, improper
maintenance or repair, or unauthorized modification. FLIR Systems, Inc. specifically
disclaims any implied warranties or merchantability or fitness for a specific purpose and will
not be liable for any direct, indirect, incidental or consequential damages. FLIR’s total
liability is limited to repair or replacement of the product. The warranty set forth above is
inclusive and no other warranty, whether written or oral, is expressed or implied.
The information in this document is subject to change without notice and describes only the
product defined in the introduction of this documentation. This document is intended for
the use of Extech Instruments customers only (a Flir Systems, Inc. brand) for the purposes
of the agreement under which the document is submitted, and no part of it may be
reproduced or transmitted in any form or means without the prior written permission. For
information address: Flir Commercial Systems, Inc.. 9 Townsend West, Nashua NH, 03063
U.S.A.
The information or statements given in this document concerning the suitability, capacity, or
performance of the mentioned hardware or software products cannot be considered binding
but shall be defined in the agreement made between Flir Systems and the customer.
However, Flir Systems has made all reasonable efforts to ensure that the instructions
contained in the document are adequate and free of material errors and omissions. Flir
Systems will, if necessary, explain issues which may not be covered by the document.
Other product names mentioned in this document may be trademarks of their respective
companies, and they are mentioned for identification purposes only.
Copyright 2013 Flir Systems, Inc., All Rights Reserved
Printed in the United States of America
