Exsurco Medical Amalgatome SD, User Manual

Page: 25 / 62

A
MALGATOME
®
SD U
SER
G
UIDE
PN#: X101456, Rev. C Page 21 of 56
5. Disassemble the hand piece from the cutting head.
a.
Using a counterclockwise motion, loosen the cutting head from the hand piece.
b. Using sterile water, remove any apparent debris from the Amalgatome SD components in order to prevent
the drying of blood and body fluids.
c. Place the cutting head into the sterilization container.
d. Place the hand piece into the sterilization tray.
CAUTIONS:
•
Do not allow blood, tissue, or disinfectants to dry on any part of the Amalgatome SD System.
•
Do not use cleaning agents with chlorine or chloride (e.g., saline or bleach) as the active ingredient as
they are corrosive to stainless steel and can result in physical damage to the system, including rust and
corrosion.
•
Do not use saline as it has a corrosive effect on stainless steel and can result in physical damage to the
system.
•
Always use cleaning agents that are safe for surgical instruments and stainless steel.
•
Immediately disconnect the pneumatic hose once the surgical case is complete.
•
Do not lay device on patient when not in use, place on back table or accessible sterile field location.
6. Prepare the Amalgatome SD and sterilization tray for transport to the decontamination department per facility
protocol.
7. Secure the instrument tray for transport.