S:\Files\QA\CERTS\C-OF-C\Minipurge CE SC004 Issue9.doc
EU-Declaration of
Conformity
With
European
Directives
Issued under the sole responsibility of
Expo Technologies Ltd
Unit 2, The Summit, Hanworth Road
Sunbury on Thames TW16 5DB, UK
This is to declare that
“
Purge Controllers: Sub-MiniPurge, MiniPurge,
Super-MiniPurge, Super-MiniPurge 1800/3500/7000/7000X
”
are manufactured in conformity with the following
European Directives and standards:
Electromagnetic Compatibility Directive 2014/30/EU
MiniPurge Systems with a /PO suffix in the type number are non-electrical and are outside the scope of the
EMC Directive.
MiniPurge Systems with suffices /PA or /IS incorporate one or more volt-
free (“dry”) contacts which work in
circuits specified by others. In normal operation these circuits are “benign”
and no CE mark is appropriate.
MiniPurge Systems with Electronic Timer (Option /ET) are designed to conform to the EMC Directive, in
compliance with EN 61000-6-4:2007 and EN 61000-6-2:2005 (Intertek Report EM10048000).
Low Voltage Directive 2014/35/EU
MiniPurge Systems are intended for use in potentially explosive atmospheres (Hazardous Areas) and are
therefore excluded from the Low Voltage Directive.
Pressure Equipment Directive 97/23/EC
MiniPurge Systems are classified as not higher than category I under Article 9 of this Directive and intended for
use in potentially explosive atmospheres (Hazardous Areas) and are therefore excluded from the Pressure
Equipment Directive.
ATEX Directive 2014/34/EU Equipment for explosive atmospheres
MiniPurge Systems are designed to conform to the ATEX Directive in fulfilment of the essential health and
safety requirements set out in Annex II, and in compliance with:
EN 60079-0: 2012 + A11:2013
EN 60079-2: 2014
MiniPurge Systems are certified by SIRA Certification Service, Hawarden Industrial Park, Hawarden CH5 3US,
England, under EC Type-Examination Certificate SIRA 01ATEX1295X, in compliance with:
EN 60079-0: 2012
EN 60079-2: 2014
According to the model, MiniPurge Systems are rated and shall be marked as follows:
MiniPurge, Type X & Type Y models
Group II Category 2G & 2D
II 2(2) GD
MiniPurge, Type Z models
Group II Category 3G & 3D
II 2(3) GD
MiniPurge systems are manufactured under Production Quality Assurance Notification
SIRA 99 ATEX M043, issued by SIRA Certification Service, Notified Body No 0518.
Signed for and on behalf of Expo Technologies Ltd.,
John
Paul
de
Beer
Date
16/08/2016
Managing Director
Confidential Assessment file reference SC004
J
J
J
J
J
J
J
J
J
J
J
J
J
J
Jo
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
hn Paul de
