manualshive.com logo in svg

Expert EX-96 7A Series, User Manual, Page: 58 / 94

Share
Download
Expert EX-96 7A Series User Manual Download Page 58

EX-96XX7A User Manual   

58

select Enabled. This will reset the Extended System Configuration Data (ESCD) after exiting from 
Setup. Options are: Enabled and

 Disabled.

 

 
Resource Controlled By 

Award Plug and Play BIOS has the capacity to automatically configure all of the boot and Plug 

and Play compatible devices. However, this capability means absolutely nothing unless you are using 
a Plug and Play operating system such as Windows®95/98. If set to Manual, you may have access 
into each submenu under this item (each submenu begins with "

¾

") and select specific resource 

manually. Options are: 

Auto(ESCD)

 and Manual. 

 

IRQ Resources 

This item determines whether IRQ interrupt is assigned to Plug-and-Play device or 

Non-Plug-and-Play ISA device.   

 
PCI/VGA Palette Snoop 

This item should be left Disabled. Options are: Enabled and 

Disabled

. 

 

** PCI Express Relative Items ** 
Maximum Payload Size       [128] 

This item allows you to configure maximum payload size of TLP (Transition Layer Packet). 

Options are: [128], [256], [512], [1024], [2048] and [4096]. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for EX-96 7A Series































































































Reviews:

No comments