manualshive.com logo in svg

Expert EX-96 7A Series, User Manual, Page: 29 / 94

Share
Download
Expert EX-96 7A Series User Manual Download Page 29

EX-96XX7A User Manual   

29

Before connection, make sure that pin out of the USB adapter is in accordance with that of the 
said tables. Any inconformity may cause system down and even hardware damages. 

 

10. JCOM 

(2.0MM 2X6)

 COM1/2 setup jumper

: pin 1~6 are used to select signal out of pin 9 

of COM1 port; pin 7~12 are used to select output type for COM2 port (RS232 or RS422/485). 

JCOM Function 

CLOSE 1-2 

COM1 Pin9=RI (default) 

CLOSE 3-4 

COM1 Pin9=+5V 

CLOSE 5-6 

COM1 Pin9=+12V 

CLOSE 7-9 
CLOSE 8-10 

COM2 FOR RS232 FROM COM2 
(default) 

CLOSE 9-11 
CLOSE 10-12 

COM2 FOR RS485/RS422 FROM 
COM22 

Note:  

1.  As determined by its hardware design, the board features full-duplex RS485 communication. Like 

RS422, a four-wire connection is necessary.   

Since COM2 and COM22 use the same address, they cannot work at the same time.

 

 
**Optional module: TB-507 

TB-507 is a transfer board which concert RS-232 to RS-422 or half duplex RS-485 signal. 
This module will be installed at COM2 port. 
Please notice that after installed TB-507, the COM2 port will only have RS-422 or half duplex   
RS-485 output. And please do not change JCOM setting for COM2.(keep in RS232, close 7-9, 
8-10) 
 

Jumper setting of TB-507: 

 

 

 

 

Summary of Contents for EX-96 7A Series































































































Reviews:

No comments