Expert EX-96 7A Series User Manual Download Page 52

Page: 52 / 94

EX-96XX7A User Manual

Onboard Serial Port 4 [2E8/IRQ3]

Onboard Serial Port 5 [4F8/IRQ4]

Onboard Serial Port 6 [4E8/IRQ3]

Power On By PS/2 Keyboard [Disabled]

Watch Dog Timer Select [Disabled]

↑↓→←

:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Onboard Parallel Port

This item allows you to determine the I/O address and corresponding interrupts for the onboard
parallel port LPT. Options are: Disabled,

378/IRQ7

, 278/IRQ5 and 3BC/IRQ7.

Onboard Serial Port 1/2/3/4

These four selection fields allow you to select the I/O address and corresponding interrupts for

serial port COM1/2/3/4. Options are: Disabled, 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4 and 2E8/IRQ3.

Onboard Serial Port 5/6

These two selection fields allow you to select the I/O address and corresponding interrupts for serial
port COM5/6. Options are: Disabled, 4F8/IRQ4 and 4E8/IRQ3.

UART Mode Select

Generally, Onboard Serial Port 2 of motherboard can also be used as infrared port. This item

allows you to determine whether Onboard Serial Port 2 is used as normal serial port or infrared port.
Four options are available:

Normal (used as serial port)
IrDA (used as standard infrared port)
ASKIR (used as responder infrared port)

UR2 Duplex Mode

This item will be set to Half Duplex (Half) mode unless your infrared device supports Full Duplex

(Full) mode.

Power On By PS/2 Keyboard

Three options are available:

Disabled

Summary of Contents for EX-96 7A Series































































































Search results

Summary of Contents for EX-96 7A Series

Reviews:

Expert EX-96 7A Series, User Manual, Page: 52 / 94

Search results

Summary of Contents for EX-96 7A Series

Reviews: