manualshive.com logo in svg

Expert EX-96 7A Series, User Manual, Page: 35 / 94

Share
Download
Expert EX-96 7A Series User Manual Download Page 35

EX-96XX7A User Manual   

35

   

24. SATA1/2

 SATA Connectors: 

two SATA connectors are provided, with transfer speed 

up to 3.0Gb/s.

 

 

25. CN1

 (2.5MM 1X2)

: an onboard 5V output connector is reserved to provide power for 

IDE/SATA devices.

 

Pin# Signal 

Name 

1 +5V 
2 Ground 

Note:  

Output current of the connector must not be above 1A.   

 

26. BZ

 

Buzzer

: 

onboard buzzer

 

 

27. PC104+

 

PC104+ connector

: it conforms to standard PC104+ specification.   

 

28. DIMM

 

Memory socket

: 

the socket is located at the backside of the board and supports 

200PIN 1.8V DDRII400/533 memory module up to 2G. If a DDRII667/800 memory module is 
installed, the system will reduce the DRAM frequency to 533MHz. 

 

29. MPCIE

 Mini PCIE slot

: it supports MINI PCIE devices with USB2.0, SMBUS and PCIE 

signal.  

 

30. CF 

CF Card Slot

: it is located at the backside of the board and serves as an insert 

interface for Type I and Type II Compact Flash card. The operating voltage of CF card can be 
set as 3.3V or 5V. The default setting of the product is 3.3V.   
 

 
 
 
 
 

Summary of Contents for EX-96 7A Series































































































Reviews:

No comments