Expert EX-96 7A Series, User Manual, Page: 25 / 94

EX-96XX7A User Manual 25
2.2.1 SO-DIMM Installation
To install a SO-DIMM into a SO-DIMM socket, please follow the steps below and refer to picture.
Figure 2.2: Installation of Memory Module
Step 1:
Locate the SO-DIMM socket . Place the SO-DIMM on an anti-static pad with the solder side facing
up.
Step 2:
Align the SO-DIMM with the socket . The SO-DIMM must be oriented in such away that the notch in
the middle of the SO-DIMM must be aligned with the plastic bridge in the socket.
Step 3:
Insert the SO-DIMM . Push the SO-DIMM chip into the socket at an angle. (See Figure 2.3 )
Step 4:
Open the SO-DIMM socket arms . Gently pull the arms of the SO-DIMM socket out and push the rear
of the SO-DIMM down