manualshive.com logo in svg

Expert EX-96 7A Series, User Manual, Page: 2 / 94

Share
Download
Expert EX-96 7A Series User Manual Download Page 2

EX-96XX7A User Manual   

2

Warning!___________________________________ 

 
 

 

This equipment generates, uses and can radiate radio frequency energy and if not installed and   
used in accordance with the instructions manual, it may cause interference to radio communications. 
It has been tested and found to comply with the limits for a Class A computing device pursuant to   
FCC Rules, which are designed to provide reasonable protection against such interference when   
operated in a commercial environment. Operation of this equipment in a residential area is likely 
to cause interference in which case the user at his own expense will be required to take whatever 
measures may be required to correct the interference. 
 

 
 
 

 
 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Electric Shock Hazard – Do not operate the machine with its back cover removed. There are   
dangerous high voltages inside. 
 

Summary of Contents for EX-96 7A Series































































































Reviews:

No comments