23
□
□
□
Ethernet MAC Address
Converter is a unique MAC (Media Access Control) address used by Ethernet
.
□
□
□
Password
This field is the administration password for authentication. Factory default is
“
empty
”. However, it is not recommended to leave it empty in field operation.
If you could not login, it means you have to key in the password. If you do not
know the password you can turn off the power and then use any point tip to
push “Reset” button and hold it to turn on the power at the same time for
5
seconds.
The password will be reset to the factory default as
“empty”.
Converter device uses the same password protection mechanism commonly
used in Windows NT or UNIX. If there are more than
“3 consecutive failures”
in password check during login, the login function will be disabled for
“15
minutes”
. During this 15 minutes period, even if you supply correct password,
login will not proceed. This prevents intruders from finding the password by
computer generated program.
Summary of Contents for EX-9132C-2
Page 1: ...Operation Manual of EX 9132C 2 DDS Serial to TCP IP Converter Version 1 1 0 25th Jan 2010 ...
Page 15: ...14 Wiring Architecture RS 232 Wiring Architecture RS 422 RS 485 Wiring Architecture ...
Page 35: ...34 Figure 6 2 Select TCP IP Winsock option at the Connect using field see Figure 6 3 ...
Page 38: ...37 Figure 6 5 ...