manualshive.com logo in svg

Expert EX-9132C-2, Operation Manual, Page: 13 / 43

Share
Download
Expert EX-9132C-2 Operation Manual Download Page 13

 

 

12

Left Side 

Power Supply 

EX-9132C-2 TCP/IP converter device is powered by a single 9VDC (inner 

positive/outer negative) power supply and 500mA of current. A suitable power supply 

adapter is part of the packaging. Connect the power line to the power jack at the

 

left 

side of EX-9132C-2 TCP/IP converter device and put the adapter into the socket. If 

the power is properly supplied, the “PWR” red color LED will be on.. 

 

 

Ethernet LAN Port 

The connector for network is the usual RJ45. Simply connect it to your network 

switch or Hub. When the connection is made, the LAN LED indicator will light up. 

When data traffic occurs on the network, red DATA LED indicator will blink during 

data transferring and receiving. 

 

Reset Button 

If you forget the setup password or have incorrect settings which makes e-Net TCP/IP 

converter inoperable. First, turn off the power. Second, use any point tip to push this 

button and hold it to turn on the power at the same time for 5 second.  All the 

parameters will be reset to the factory default.

 

Ethernet LAN Port 

Reset Button 

DC-In  

Power Outlet   

Summary of Contents for EX-9132C-2












































Reviews:

No comments