21
Web Browser Configuration
The following topics are covered in this chapter:
□
□
□
Serial To Ethernet Converter Setup
●
Login Setting
●
Login Setting Page Field Description
●
Parameter Setting
●
Parameter Setting Page Field Description
Login Setting
In addition to basic IP address and subnet mask, specific device settings can be set
through HTTP protocol with popular browsers, e.g. Internet Explorer, Netscape,
etc. Setup of the converters is as easy as surfing on WWW, no special software
will be required.
Setup converter device is as easy as surfing on WWW; no special software will be
required. Popular Browsers, such as IE, or Netscape, can easily do the setup
process. In the browser URL field, set the IP address of device directly, to enter
the
“Login Setting”
page, please follow the steps below.
□
□
□
Open your browser. This chapter will use IE as an example.
□
□
□
In the browser URL field, type the IP address of the converter directly and
press ENTER. (The IP address is what you set using the Device Management
Utility as EXBrowser.)
□
□
□
To press fourth icon of
“Web Browser”
on function bar and a “
Login
Setting
” Screen will be shown (see Figure 3.9)
to login into the device
.
Alternatively, if the IP address of the converter is already known, you can
connect to the converter directly by providing its IP address in the URL field
Summary of Contents for EX-9132C-2
Page 1: ...Operation Manual of EX 9132C 2 DDS Serial to TCP IP Converter Version 1 1 0 25th Jan 2010 ...
Page 15: ...14 Wiring Architecture RS 232 Wiring Architecture RS 422 RS 485 Wiring Architecture ...
Page 35: ...34 Figure 6 2 Select TCP IP Winsock option at the Connect using field see Figure 6 3 ...
Page 38: ...37 Figure 6 5 ...