Expert E201113, Quick Manual

Page: 3 / 10

Assembly for unloading Exploded view
Assembly completed
501 Nut: M20 x P2.5 360 Pressure ring Ø60 385 Pressure ring Ø85 243 Centering ring Ø43
502 Spindle ; M20 x P2.5 364 Pressure ring Ø64 234 Centering ring Ø34 245 Centering ring Ø45
401 Bearing cover 368 Pressure ring Ø68 238 Centering ring Ø38 101 Retainer adaptor for nut
402 Housing 372 Pressure ring Ø72 239 Centering ring Ø39 101 Retainer adaptor for nut
403 Adaptor ring Ø70 374 Pressure ring Ø74 240 Centering ring Ø40 102 Retainer adaptor for spindle
404 Adaptor ring Ø75 380 Pressure ring Ø80 241 Centering ring Ø41 102 Retainer adaptor for spindle
405 Adaptor ring Ø80 382 Pressure ring Ø82 242 Centering ring Ø42
Instructions for unloading a bearing
BEARING UNLOADING
This tool set is for the precise, quick and professional removal and replacement of wheel bearings.
The design can prevent damage to the new wheel bearing, because the press pieces enable
safe and accurate centering and alignment when changing wheel bearings.
1) Select an Adaptor Ring
(403~405) that fits against
the wheel bearing housing.
2) If there is not enough space to fit
a Adaptor Ring the bearing can
be unloaded without it.
3) Combine the Retainer Adaptor
(101) with the Bearing Cover
(401).
4) Combine the assembly from
step 3 with the selected
Adaptor Ring as shown (where
applicable).
5 ) Measure the inner diameter
of the Bearing to select the
Centering Ring (234~245).
6) Measure the outer diameter of the
Bearing to select the Presure Ring
(360~385).
7) Combine the Pressure Ring, the
Centering Ring and Spindle
adaptor (102).
8) Combine the assembly from step
7 with the Pull Spindle (502).
9) Mount the two assemblies on the
wheel bearing housing as shown
attaching the Clamping Nut
(501) on to the end of the
spindle.
10) Unload the bearing into the
housing by tightening the
assembly using a wrench,
socket and ratchet as shown.
BEARING LOADING
Assembly for loading Exploded view Assembly completed
501 Nut: M20 x P2.5 360 Pressure ring Ø60 385 Pressure ring Ø85 243 Centering ring Ø43
502 Spindle ; M20 x P2.5 364 Pressure ring Ø64 234 Centering ring Ø34 245 Centering ring Ø45
401 Bearing cover 368 Pressure ring Ø68 238 Centering ring Ø38 101 Retainer adaptor for nut
402 Housing 372 Pressure ring Ø72 239 Centering ring Ø39 101 Retainer adaptor for nut
403 Adaptor ring Ø70 374 Pressure ring Ø74 240 Centering ring Ø40 102 Retainer adaptor for spindle
404 Adaptor ring Ø75 380 Pressure ring Ø80 241 Centering ring Ø41 102 Retainer adaptor for spindle
405 Adaptor ring Ø80 382 Pressure ring Ø82 242 Centering ring Ø42
˙ Suitable for VW, Audi, Seat, Opel, BMW .…. etc.
˙ For wheel bearing diameter 60 mm - 85mm.
˙ This tool set is for the precise, quick and professional removal and replacement of wheel bearings.
˙ The design can prevent damage to the new wheel bearing, because the press pieces enable safe and
accurate centering and alignment when changing wheel bearings.
Instructions for loading a bearing
1) Measure the inner diameter
of the Bearing to select the
Centering Ring (234~245).
2) Combine the Adaptor
(101) with the selected
Centering Ring (234~245).
3) Measure the outer
diameter of the Bearing
to select the Presure Ring
(360~385).
4) Combine the selected Presure
Ring with the adaptor and
centering ring assembly from
step2.
5) Combine the three piece
assembly with the Bearing.
6) Take the Bearing cover (401)
and combine with Retainer
Adaptor (102).
7) Combine the Pull Spindle (502), Retainer Adaptor (102) & Bearing Cover (401).
8) Mount the two assemblies on the wheel bearing housing as shown attaching
the Clamping Nut (501) on to the end of the spindle.
9) Load the bearing into the housing by tightening the assembly using a wrench, socket and
ratchet as shown.
EN