Performing treatment
45
GB
9.7
Programme mode
The programmes automatically control the temperature and duration of treat-
ment. To change the setting, read "Changing treatment settings" on page 46.
9.8
Selecting programme
•
Select the desired treatment using the
TREATMENT
button.
-
When
TREATMENT 1
is pressed, the programme code
CA
appears in the
display and then the treatment time of 10 minutes.
-
The lower display shows the preset final temperature setting 4 (the tem-
perature development is not displayed).
-
The LED in the
ION
button is lit – ionisation is switched on.
Returning to start position:
•
By pressing the
CLEAR
button, the appliance returns to start position.
-
The selected programme is deselected.
-
The treatment is cancelled.
9.9
Starting treatment
•
Press the
START
button.
-
The thermometer symbol is lit (approx. 2 minutes).
-
The display shows the remaining treatment time.
-
By pressing the
START
button again, the treatment time that has al-
ready passed (memo function) is displayed.
In chapters "Changing treatment settings" on page 46 and "End of treatment /
performing follow-up treatment" on page 46 you can read how to change set-
tings or start a follow-up treatment.
TREATMENT 1
Default settings
Recommended for care (Care)
Treatment time: 10 minutes.
Temperature: consistent temperature at setting 4
throughout the entire treatment - or your selected tem-
perature.
TREATMENT 2
Default settings
Recommended primarily for plant-based dye (Color)
Treatment time: 20 minutes.
Temperature: 3 min. raising temperature to setting 4;
Remaining time: setting 4 (default) - or your selected
temperature.
TREATMENT 3
Default settings
Recommended for lightening / bleaching (Bleach)
Treatment time: 30 minutes.
Temperature: 8 min. consistent low temperature;
5 min. raising temperature to setting 3;
remaining time: setting 3 (default) - or your selected
temperature.
Programme code
Is lit during warming up
__P71.book Seite 45 Freitag, 5. November 2021 9:42 09