44
Performing treatment
GB
-
Also comply with the manufacturer’s instructions for the products used.
-
Take into account that the exposure times of the products may change
due to heat.
•
Always monitor the treatment results already achieved.
9.6
Manual mode
Setting treatment time
•
Set the desired treatment time using the
10
and
1
buttons:
-
Button
1
: input in 10-minute increments,
-
Button
10
: input in 1-minute increments.
The display shows the treatment time selected.
Setting treatment temperature
CAUTION – Risk of damage to hair
~
The exposure time of the products also depends on the treatment tempera-
ture selected and must be taken into account by professionals when deter-
mining the treatment temperature appropriate for the product used.
~
Always monitor the treatment results already achieved.
•
Use the
+
and
-
buttons to select the desired temperature setting.
-
The temperature setting selected is displayed on the 5-level temperature
scale.
Deselecting programme / resetting to start position:
•
You can delete the values entered and reset the appliance to the start posi-
tion using the
CLEAR
button.
-
The treatment is cancelled.
Starting treatment
•
Press the
START
button.
-
Warming-up phase: the temperature symbol is lit (approx. 2 minutes).
-
The display shows the remaining treatment time.
-
By pressing the
START
button again, the treatment time that has al-
ready passed (MEMO function) is displayed.
•
Press the
ION
button to switch ionisation on and off. When the function is
switched on, the LED in the button is lit.
In chapters "Changing treatment settings" on page 46 and "End of treatment /
performing follow-up treatment" on page 46 you can read how to change set-
tings or start a follow-up treatment.
Display
Temperature display
Start position
__P71.book Seite 44 Freitag, 5. November 2021 9:42 09
