Assembly
37
GB
WARNING! Risk of injury
~
It is only permitted to use accessory parts approved by the manufacturer.
Rapidly moving spring arm (wall-mounted version only)
~
The spring arm of the wall-mounted version is under high spring tension. If
the appliance is dismantled, the spring arm will shoot upwards and can cause
serious injuries.
~
The appliance must only be installed/dismantled by a specialist (electrician,
technician) or comparably qualified personnel in accordance with the appli-
cable assembly instructions.
Falling wall arm (wall-mounted version only)
~
Never hang additional loads on the wall arm.
CAUTION! – Risk of property damage
~
Wall-mounted version: avoid the appliance colliding with nearby walls and
objects. An optional limit stop can be mounted on the wall bearing by the
Technical Customer Service.
~
Do not use petrol, paint thinner, abrasive cleaners or scouring agents for
cleaning.
~
Keep the ambient temperature in the salon between 15 °C and 35 °C.
~
The relative humidity must not exceed 95%.
~
Do not place the appliance in direct sunlight, near high temperatures or heat-
ers, or in damp rooms.
~
Do not insert the water boiler into the appliance or operate it without seals.
6.
Assembly
6.1
Tripod version
Assemble the tripod version in accordance with the assembly instructions in-
cluded with the ST5 tripod type. For safety reasons, the old ST3 tripod type must
never be used for the hair steamer P71!
6.2
Wall-mounted version
The installation of the wall-mounted version requires specialist electrical and
engineering knowledge. This version must therefore be installed exclusively by
a specialist (electrician, technician) or comparably qualified personnel in ac-
cordance with the applicable assembly and user instructions for the ACROBAT
2000.
__P71.book Seite 37 Freitag, 5. November 2021 9:42 09
