Exhausto VEX300 Series Assembly And Installation Manual Download

Page: 2 / 44

1.1. Designations used in these instructions.............................................................7

1.1.1. Simplified diagram ...........................................................................................7

1.2. Use.......................................................................................................................... 8
1.3. Location requirements.......................................................................................... 9

1.3.1. Space requirements.........................................................................................9
1.3.2. Requirements for underlying surface............................................................. 11
1.3.3. Condensation outlet....................................................................................... 11
1.3.4. Requirements for duct system........................................................................11

1.4. Description........................................................................................................... 12

1.4.1. Design............................................................................................................12
1.4.2. Parts of the VEX unit......................................................................................13

1.5. Principal dimensions...........................................................................................14

2. Handling

2.1. Unpacking.............................................................................................................17
2.2. Transport.............................................................................................................. 18

2.2.1. Passage through openings ........................................................................... 19
2.2.2. Removal of doors...........................................................................................19
2.2.3. Internal transport with reduced weight........................................................... 20

3. Mechanical installation

3.1. Installing the VEX unit......................................................................................... 21

3.1.1. Installation directly on floor.............................................................................21
3.1.2. Installation on mounting base........................................................................ 21

3.2. Condensation outlet............................................................................................ 21

3.2.1. Establishment of condensation outlet............................................................ 21

3.3. Control box...........................................................................................................23

3.3.1. Installation of control box .............................................................................. 23

3.4. Water connection (HW/CW).................................................................................24

3.4.1. Principles for connecting the cooling/heating coil.......................................... 24
3.4.2. Installation requirements................................................................................25
3.4.3. MVM valve..................................................................................................... 26

3.5. Connection to cooling/heating system (DX)..................................................... 27

3.5.1. Principles for connecting the DX coil..............................................................27
3.5.2. Soldering the pipes........................................................................................ 27

4. Electrical installation

4.1. Electrical installation........................................................................................... 28

5. Maintenance, hygiene and servicing

5.1. Opening the VEX unit.......................................................................................... 29
5.2. Maintenance......................................................................................................... 29

5.2.1. Maintenance Schedule...................................................................................29

3005993-2021-03-09

2/44

Summary of Contents for VEX300 Series













































Search results

Summary of Contents for VEX300 Series

Reviews:

Related manuals for VEX300 Series

Brands by name

Popular brands

Exhausto VEX300 Series, Assembly And Installation Manual

Search results

Summary of Contents for VEX300 Series

Reviews:

Related manuals for VEX300 Series

Brands by name

Popular brands