background image

IMPORTANT — 

This Document is customer property and is to remain with this unit.

Please return to service information pack upon completion of work.

EMI/EFI Air Handler Kit

Model:

BAYAHEMIKIT001A

Used With:

EMI/EFI Air Handler Motor

BAYAHEMIKIT001A KIT COMPONENTS

See Figure 1

ALL phases of this installation must comply with NATIONAL, STATE AND LOCAL CODES

SERVICE 

INSTALLER'S

GUIDE

APPLICATION:

The EMI/EFI Air Handler Kit may be used on any air handler 
unit with a CTM or variable speed motor. This Kit helps to 
reduce the emitted noise generated when running these 
motors. 

18-GJ84D1-1A-EN

FIGURE 1

s

s

WARNING

!

The cabinet must have an uninterrupted or unbroken 

ground according to National Electrical Code, ANSI/NFPA 

70 - "latest edition" and Canadian Electrical Code, CSA 

C22.1 or local codes to minimize personal injury if an 

electrical fault should occur.

Failure to follow this warning could result in an electrical 

shock, fire, injury, or death.

DISCONNECT POWER BEFORE SERVICING

WARNING

EMI Kit BAYAHEMIKIT001A

ITEM # Part Number

Part Description

Qty

1

D806151

TEM Male/Female Harness

1

2

D806153

TAM / GAM 
Male/Female Harness

1

3

D806180P01

In-line EMI Filter (Schaffner)

1

4

D806121P01

Bracket, In-line EMI Filter

1

5

D804964P08

Gasket for back of Bracket

1

6

D806181P01

Ferrite Beads

2

7

D905103P01

#10 x 3/8" Cutting Screws

2

8

D804271P01

#8 x 1/2" Screws

2

9

D803499P01

#8 x 1/2 Cutting Screws

2

10

C107736P07

Cable Ties

4

11

18-GJ84D1-1A-EN Installation Instructions

1

12

D806182P01

Wiring Diagram

1

13

D806182P02

Wiring Diagram

1

14

D806182P03

Wiring Diagram

1

s

s

WARNING

!

 

Disconnect power to the unit before removing the blower  

or coil door.

Failure to follow this warning could result in personal in-

jury from moving parts.

1

2

3

4

5

6

7
8
9

10

s

s

WARNING

!

Prevent all wires from touching any hot surfaces.

Failure to follow this warning could result in dangerous 

operation, serious injury, death or property damage.

Summary of Contents for BAYAHEMIKIT001A











Reviews: