Page 2
EMI FILTER INSTALL INSTRUCTIONS FOR
TAM / GAM AIR HANDLERS
1. Mount the EMI filter (Item 3) to the EMI filter bracket
(Item 4) using two #8 screws (Item 8). See Figure 2.
FIGURE 2
FIGURE 3
FIGURE 4
3. Mount the EMI filter and bracket to the blower shelf
using two #10 cutting screws (Item 7).
NOTE: Make sure to align the left edge of the bracket
with the left edge of the blower housing. (See Figure 4)
4. Installing Ferrite Bead (Item 6) on a variable speed
motor.
Place one ferrite bead on motor power wires.
There should be at least one loop made in the power
wires, so the wires pass through the ferrite bead twice.
See Figure 5.
FIGURE 5
2. Apply the gasket (Item 5) to the back bottom edge of
the bracket. See Figure 3.
