8
Step 8. Install the plastic cover (If LED Option go to next step)
Install the plastic cover by sliding it over the centre of the disc block (see figure 8). The cover is held
in place by friction. There is no need to force it on, just push lightly
MODEL EF34
Figure 8.
Remote Operation
SPEED DOWN
Changing the direction of rotation
clockwise (CW)
or anti-clockwise (CCW)
Light intensity adjustment
SPEED UP
Fan ON/OFF
LED light ON/OFF
FEATURES
Each remote is pre-programed to motor when packaged at the factory. However, we have added instructions
below on how to program the remote in the event that it may become necessary.
Install the two AAA 1.5 Volt Batteries into the remote transmitter by first removing the battery cover on the
back cover. Insert the batteries as indicated with the po end of the battery aligned with the + sign on
the battery holder