6
MODEL EF34
Red wire with household phase
Black wire with household neutral
Yellow / Green wire with household ground
Step 6 Mounting the motor
Pre-install 2 of the included #10-24 screws half-way
into the ceiling mount on either side
Install the motor onto the ceiling mount by sliding
the preinstalled bottom mount over the ceiling
mount as shown in figure 4
Using a clockwise twisting motion, the motor will
temporarily lock into the ceiling mount while you
install the remaining 2 #10-24 screws and tighten
all connections.
Figure 4.
Be sure an align the two twist lock channels with the 2
pre-installed screws added first
Household phase and neutral
ground
Phase = Red
Neutral = Black
Figure 3.
