9
MODEL EF34
Remote Operation (cont.)
Operating Functions of the Remote:
The motor has 6 speeds (1 to 6)
•
To turn the fan ON and OFF select the button labeled POWER.
•
To Increase or Decrease fan speed select SPEED UP or SPEED DOWN button. The illuminated
scale at the top of the remote will indicate the speed selected 1 through 6.
•
To change the direction of rotation, toggle the CW/CCW button for ClockWise direction or
CounterClockWise. With your Exhale Fan rotational direction is of personal preference,
performance and temperature are not affected. (if you have 2 fans in the same room, we suggest
that you turn them in opposite directions to increase the air flow)
•
Turning on the LED light is made by pressing the LED LIGHT ON/OFF button
•
The LED DIMMER button is used to provide a full-scale dimmer function for your LED. Press and
Hold the dimmer button to select the level of illumination that you desire. While holding this
button the level of illumination will increase to 100% and then decrease to 20%, just release the
button at the level of illumination that you desire.
Remote Reprogramming (Syncing the remote)
•
Turn the power OFF for at least 10 Seconds, if necessary, turn off the Circuit Breaker that routes
power to your fan.
•
Turn Power to the Fan ON
•
Within 60 seconds of turning the power on, press and hold the LED ON/OFF button for 5
seconds. Do not touch any other button during this process, doing so will cause this process to
fail.
•
Once the Synchronization is completed and detected you will hear an audible “BEEP” which
indicates a successful synchronization.
•
After completing the steps all fan functions will be available.
Please note that if a Power Failure occurs you may have select the CW / CCW direction button since
it is not remembered by the fan.
